Roll Type Carton Closing Staple Machine Double Divergent Point
Staple Machine
Roll type carton closing staple machine
Products Description
Our company has advanced technology and rich experience, by widely
absorbing the advanced technologies of domesctic and overseas,
thoroughly taking the processing needs of modern staple line into
consideration, and keeping revising and improving.
Thanks to our adopting the latest processing technology, precise
assembly and debugging technology, and strict quality test, our
products are of good quality and stable performance.
Copper coated or zinc coated round steel wire in coils are put on
passive driven type wire stands pay-off, then go through two pairs
of straightening rollers(one in vertical and one in horizontal), go
into one pair of flattening rollers to form flatten wire(the
distance between two flattening wire can be adjusted according to
actual size need). Then be cut and punched into required shape type
single wire, meanwhile be sticked together by adhesive tape, then
wind into roll type onto required paper sleeves.
For all sizes, machine structure is same. When the staple crown
dimension is same, only staple leg different, can produce on same
machine by change of railway width. If staple crown dimension is
different or bending angle is different, need to exchange full set
of railway system.
Technical parameter of roll type carton closing staple machine
| Model | ST-RCC |
| Flattening motor | 0.75KW |
| Cutting and forming motor | 0.5KW |
| Capacity | About 150pcs/min |
| Produced staple size | Crown size 32/35mm, leg length 15/18/20/22mm, flatten wire size
0.9*1.9mm/0.9*2.3mm |
| Machine weight | 300kgs |
| Machine size | 1000*700*1500mm |
ST-ZZ Double divergent point staple machine
Two sets zinc coated round steel wire in coils are put on passive
driven type wire stands pay-off, then go through two pairs of
straightening rollers(one in vertical and one in horizontal),
separately go into each own pair of flattening rollers to form
flatten wire(the distance between two flattening wire can be
adjusted according to actual size need). Then be cut and punched
into required shape type single wire, meanwhile be sticked together
by A+B glue, then get induction heating and blowing drying, then
cut into required length of staple.
For all sizes, machine structure is same. When the staple crown
dimension is same, only staple leg different, can produce on same
machine by manual length regulation. If staple crown dimension is
different, need to exchange full set of railway system.
When want to produce single divergent point staple, need to
disassembly off one cutting mold and offer only one wire for
pay-off.
Technical parameter of divergent point staple machine:
| Model | ST-ZZ |
| Flattening motor | 2sets, each power 0.5KW |
| Cutting and forming motor | 0.5KW |
| Capacity | About 150pcs/min |
| Machine weight | 330kgs |
| Machine size | 1000*700*1500mm |
Company Profile
Sticking to the principle of quality for survival and reputatiton
for development, our company continuously develops new products and
improves their quality.
Hangzhou Suntech Machinery Co., LTD is sincere in cooperation with
people from all walks of life to create jointly great success!
