A manual pipe grooving tool, also known as a pipe groover or pipe
grooving machine, is a hand-operated tool used to create grooves or
notches in pipes. These grooves are typically made for joining
pipes together using mechanical couplings or fittings. Manual pipe
grooving tools are commonly used in plumbing, fire protection, and
HVAC (heating, ventilation, and air conditioning) systems.
Technical Parameters
Machining size: 3/4”-8” (27-219mm) SCH40 steel pipe
Pipe wall thickness: Max 7mm
G.W.: 23kgs
Packing size: 25 x 15x 25 cm
Remark: Can be mounted on RIDGID300 power unit
Learning of pipe grooving machine
Here's a general overview of how a manual pipe grooving tool works:
1. Select the appropriate tool: Choose a manual pipe grooving tool
that is compatible with the pipe material, size, and groove
specifications you require. Different tools are designed for
specific pipe materials such as steel, copper, or plastic.
2. Pipe preparation: Prepare the pipe by cutting it to the desired
length and removing any burrs or debris from the ends using a pipe
cutter or deburring tool.
3. Mount the pipe: Securely mount the pipe in a vise or
pipe-holding device to keep it stable during the grooving process.
Ensure that the pipe is aligned properly and firmly clamped.
4. Adjust the tool: Set the tool according to the groove
specifications required for your specific application. This may
involve adjusting the groove depth, width, and location on the
pipe.
5. Position the tool: Position the manual pipe grooving tool at the
desired location on the pipe. The tool typically consists of a
cutting wheel or blade that is designed to create the groove.
6. Operate the tool: Apply consistent pressure and rotate the tool
around the pipe circumference. The cutting wheel or blade will
gradually remove material from the pipe, forming the groove as you
rotate the tool.
7. Inspect the groove: Periodically inspect the groove to ensure
that it meets the required specifications and standards. Check for
proper depth, width, and smoothness of the groove.
8. Repeat as needed: If multiple grooves are required on the same
pipe or if you're working with multiple pipes, repeat the process
for each groove.
9. Clean the pipe: Once the grooves are made, clean the pipe to
remove any debris or metal shavings generated during the grooving
process.
It's important to note that the specific steps and operation of a
manual pipe grooving tool may vary depending on the tool design and
manufacturer. Always refer to the manufacturer's instructions and
follow proper safety precautions when using any tools or equipment.
Troubleshooting
| Fault Phenomena | Fault Analysis | Troubleshooting |
| Voltage buildup fails | 1. Pressure relief valve switch is not tightened. | Tighten pressure relief valve switch |
| 2. Check valve inside the valve body cannot be closed | Dismantle and repair the check valve |
| Lack in oil | Add hydraulic oil |
| It doesn’t work when swaying plunger rod of oil pump | 1. Insufficient oil | Add hydraulic oil |
| 2. Too dirty oil blocks the oil suction hole | Wash oil line and replace hydraulic oil |
| 3. Fitting surface of oil suction valve leaks | Remove the small oil cylinder; use a tool to knock the steel ball
of oil suction valve |
| 4. Oil seal of small piston is damaged | Replace the oil seal. |
| Principal axis of oil pump leaks oil | Oil seal of principal axis of oil pump is worn or burred | Replace oil seal of principal axis |
| Pipe deviates seriously | 1. Bracket height and direction are improper | Adjust the bracket |
| 2. The lower knurl wheel is worn | Replace it |
| 3. Pinch roller bearing is damaged | Replace it |
| Oil suction is not smooth | 1. Oil line is blocked | Remove sundries from oil line |
| 2. Large vacuum degree | Discharge air |
| 3. Excessive viscosity of hydraulic oil | Replace hydraulic oil |
Our service:
1. How long is your machine warranty?
Warranty of our product is one year(Artificial damage and incorrect
use is not included), within warranty period ,we will offer free
part and maintain video ,or ever can teach you face-to-face, if
machine have serious quality problem ,we support to back .
2. What is your shipping way ?
Express (DHL, FedEx, TNT), by air, Or Sea. We will choose one
shipping way to suit customer’s request.
FAQ
1. Who are we?
We are professional plumbing tools company located in Hangzhou city
of China, we are close to Port Shanghai, Ningbo and Yiwu. We mainly
sell to North America, Europe and the Middle East countries. Our
client are tools wholesaler and comnpany for specific constrution
project such as fire fighting pipeline building etc.
2. How can we guarantee the quality?
We will test at least one pipes on every machine before shipping
out. Some of our heavy duty models works well after even 7 or 8
years according to our client feedback, for all of our machine we
offer one year warranty.
3. What can you buy from us? All kind of pipe tools and plumbing
tools, such as pipe threading machine, pipe grooving machine, pipe
cutting machine, pipe hole cutter, manual and electric pipe bender
as well as the test pump.
4. Why should you buy from us not from other suppliers?
We focus on quality piping tools and machinery and service. We have
almost all kind of pipe tools, place order to us we can mix various
models in one shipment.
Speaking:English,Spanish,Japanese,Portuguese,German,Arabic,
French,Russian,Korean,Hindi,Italian
5. How long is the leadtime?
Since the voltage of machine motor are customized, usually the lead
time will be 30 days after payment.
6. How can you place order?
We accept T/T payment directly to our company account. We can ship
by sea to sea port nearest to your city or ship to door. We do not
have MOQ for our machines, we can ship any quantity but it is
highly recommened to make order amount not less than USD2000.00,
because according to our experience if the order are in small
amount the sea shipping adding tarrif makes it not cost-effective.
